If you’re researching Full Swing golf simulator price, here’s the short answer. A KIT-based DIY bay usually lands in the mid-four to low-five figures once you add an enclosure, projector, hitting surface, and a PC or tablet. Turnkey Full Swing simulators are priced by quote and typically sit in the higher five figures depending on room build and options.
Two important anchors to start with: Full Swing lists the KIT launch monitor at 4,999, and E6 CONNECT Basic gameplay starts at 299/year. See the official product and pricing pages for current numbers: the Full Swing KIT page and E6 CONNECT pricing.
Overview
This guide is for golfers deciding between a KIT-based build and a turnkey Full Swing simulator install. The former is a launch-monitor-first setup you expand with a screen, projector, and enclosure. The latter is a professionally designed, installed, and supported simulator package.
We’ll break down the total cost of ownership across hardware, software, installation, and ongoing expenses, with links to official pages so you can verify pricing as you plan.
By the end, you’ll know what’s included in each path, how room size and projector choices change your budget, and what ongoing subscriptions and maintenance to expect. Use the checklist near the end to finalize your build path with confidence.
Price at a glance: KIT vs Full Swing Simulator
Most buyers compare two paths: start with the Full Swing KIT and add components over time, or commission a turnkey Full Swing simulator that’s quoted, installed, and supported end to end. Either way, the launch monitor is the heart of the experience, and software subscriptions are the main ongoing cost.
- KIT-based practice or starter bay: KIT at 4,999 (Full Swing). Add software like E6 CONNECT Basic from 299/year (E6 CONNECT), and expand to an enclosure/screen, projector, hitting mat/turf, and a PC/iPad as budget allows.
- KIT-based full home bay: Common totals run roughly from the high-$8,000s into the mid-teens after you add an impact screen/enclosure, projector, hitting surface, a capable PC/tablet/monitor, mounts, cabling, and basic room prep.
- Turnkey Full Swing simulator: Price by quote via Full Swing; typically a five-figure investment (often several tens of thousands) that includes design, enclosure/screen, projector, hitting surface, install, calibration, and pro support. See Full Swing’s simulator pages for current package details.
Think of the KIT path as flexible and modular and the turnkey path as comprehensive and convenient. If you’re early in planning, verify the current KIT price on the Full Swing KIT page and software costs on E6 CONNECT pricing and GSPro’s site.
What drives Full Swing golf simulator cost
A Full Swing golf simulator cost is the sum of several pieces. The launch monitor, the “theater” around it (screen, enclosure, projector, turf), and the brains (PC/tablet and display) all contribute. Add the time to design, install, and support it. Your room dimensions and finish level are the biggest multipliers after the hardware choices.
- Core hardware: Full Swing KIT launch monitor; impact screen and enclosure; short-throw projector; hitting mat/stance turf; side/ceiling netting or panels; PC/iPad/monitor or TV.
- Software and content: E6 CONNECT tiers (starting at $299/year), GSPro license (see GSPro for current pricing), and Full Swing/FS Golf | KIT apps.
- Installation and room prep: Framing or anchoring the enclosure, mounts, projector alignment, cable management, power, lighting, and any soundproofing or wall protection.
- Space-driven choices: Ceiling height dictates swing comfort and projector placement; room depth affects throw ratio and whether you can fill a 16:9 or 4:3 screen at a safe distance.
- Shipping, taxes, and aftercare: Freight for screens/enclosures, sales tax, replacement screen wear over time, and periodic software renewals.
When you plan with these drivers in mind, you’ll avoid surprises—especially around projector selection, enclosure anchoring, and software renewals. If you prefer one invoice and a guaranteed fit, a turnkey simulator from Full Swing consolidates most of these line items into a single scope.
Full Swing KIT: price, what’s included, and when it’s enough
The Full Swing KIT is a radar-based launch monitor trusted by tour players and instructors, and it’s the foundation for both outdoor practice and indoor sim play. Full Swing lists the KIT at $4,999. It supports 16 points of club-and-ball data with video feedback and app integration. You can review the details and current price on the official Full Swing KIT page.
On its own, KIT is enough if you want accurate data outdoors or a minimal indoor net setup using an iPad or TV. Add E6 CONNECT or GSPro for simulated courses and skills games, and you have a powerful practice system without building a full enclosure. If you want the “hit into a screen” experience, you’ll add an impact screen, projector, enclosure, and hitting surface to turn KIT into a full simulator bay.
Simulator hardware components you’ll add for a KIT-based build
Most buyers expand KIT with the screen you hit into, a projector that fills it, and a sturdy, forgiving surface under your feet. Your room’s height and depth determine the enclosure size and projector model, so verify dimensions before ordering.
- Enclosure and impact screen: Sized to your room; includes frame, screen, and often side/ceiling protection. Higher-gain, tightly woven screens look better and last longer.
- Projector: Look for short-throw models with adequate brightness (often ~3,000+ lumens), the right throw ratio to fill your screen from a safe distance, and 1080p or 4K resolution. BenQ’s golf simulator projector guide explains throw and brightness considerations.
- Hitting mat and turf: A quality hitting strip plus stance turf reduces strain and improves realism; plan for durability if you practice frequently.
- Netting and side panels: Added protection for toe/heel strikes and ricochet control in tighter rooms.
- PC/iPad/Display: A gaming-capable Windows PC is common for GSPro; an iPad can run E6 CONNECT. Add a wall-mounted TV or use the projector as your primary display for sim UI.
- Mounts, cabling, and lighting: Ceiling or floor projector mount, HDMI/USB runs, and diffuse lighting that avoids washing out the image.
Before you pick a projector, confirm throw distance against your target screen size using the manufacturer’s calculator. Review a reputable room-size guide like this overview from MyGolfSpy. A bit of planning here saves you from returns and rework.
Full Swing simulator packages and common add‑ons
Turnkey Full Swing simulators package the enclosure, impact screen, projector, hitting surface, computer, and cable management. They also include design, installation, calibration, and post-install support. You’ll work with a specialist to assess your room, finalize a screen size and aspect ratio, select finishes, and schedule installation. Explore current offerings and request a quote on the Full Swing simulator site.
Common add-ons include upgraded projectors, acoustic treatments, custom cabinetry, raised platforms, and additional cameras or lighting for coaching. Expect warranty and support to be part of the package, with remote assistance and on-site options depending on your plan. Lead times vary by season and scope, so ask about scheduling when you request pricing.
Ongoing costs: software, content, and maintenance
Beyond the initial build, your main recurring cost is software. E6 CONNECT offers multiple tiers; the Basic plan lists at $299/year and includes a curated set of courses and practice modes. Many KIT owners also consider GSPro for its course library and online play; visit GSPro for current license details and pricing.
- Software subscriptions: E6 CONNECT pricing starts at $299/year for Basic; higher tiers add more courses and features. GSPro licensing is offered directly—see GSPro for up-to-date options.
- Optional services: Add-on coaching or video tools, and any premium content packs you prefer.
- Wear items and upkeep: Impact screens and hitting strips wear with use; plan periodic replacements. PCs and projectors may see upgrade cycles over a few years as software and resolutions improve.
- Support and warranty: Turnkey installs typically include structured support; DIY builds benefit from vendor warranties and community resources.
Budgeting a modest annual line for software and consumables keeps your simulator feeling fresh and performing like new. Check each provider’s pricing page before you renew to align features with how you play.
Space and installation requirements that impact budget
Your room dictates your enclosure, projector, and even your hitting stance. Many home bays feel comfortable around 10 feet of ceiling height, 12 feet of width, and 16–20 feet of depth, but your swing and projector throw needs drive the exact number. See MyGolfSpy’s room size guidance for a practical overview of what works and why.
Ceiling height affects both swing freedom and projector placement, which in turn controls screen size and aspect ratio. Depth determines whether you can mount a short-throw projector safely ahead of the hitting zone. Width influences screen width and side-panel protection. Don’t forget infrastructure: installers often flag hidden costs like adding outlets, running a dedicated circuit for the projector/PC, installing safe mounts into joists, and softening hard surfaces for noise and bounce. Reviewing a projector resource like BenQ’s simulator projector guide will help you select the right lens and brightness for your space.
Full Swing KIT vs Full Swing Simulator: which path is right for you
Choosing between a KIT-based build and a turnkey simulator comes down to budget, portability, and how much time you want to spend managing the build. If you value flexibility and lower upfront cost, KIT plus a staged build is compelling. If you want a guaranteed fit and a fixed timeline, turnkey is the safer path.
- Pick KIT-based if you want portability for outdoor practice, a smaller starting budget, and the freedom to add a screen, projector, and enclosure later.
- Pick turnkey Full Swing if you need an on-time, on-spec installation, a polished look for clients or family, and consolidated support for the whole system.
- For teaching/fitting bays, both work: KIT-based offers flexibility; turnkey adds pro-grade presentation, cable management, and fast calibration for daily use.
- For commercial play, turnkey typically wins on durability, uptime, and support SLAs; DIY is feasible if you’re prepared to maintain the system.
Map your choice to how you’ll use the space most days, not just on weekends. The right path is the one that removes friction between you and more swings.
Ways to manage your budget without sacrificing experience
You can stage your build and still get a great simulator experience. Focus first on the components that affect accuracy and playability. Then expand image quality and finishes when you’re ready.
- Start with KIT + net + iPad/TV, then add an impact screen and projector once you confirm room constraints and throwing distances.
- Prioritize projector throw ratio and brightness over headline resolution; a correctly sized, bright 1080p image often beats a dim 4K.
- Trial software tiers before committing annually; E6 CONNECT has multiple plans, and GSPro offers a different course model.
- Invest in a quality hitting strip; it protects your joints and lasts longer—cheaper turf wears quickly.
- Pre-plan electrical and mounts to avoid rework; confirm joist locations and cable paths before ordering.
- Phase upgrades: enclosure and screen first, then acoustic treatments and cosmetic finishes.
These steps keep early dollars on accuracy and usability while leaving room to refine image and aesthetics later. A bit of planning around projector throw and room dimensions pays for itself.
Buying checklist and decision framework
Use this quick checklist to turn your research into a confident purchase plan. Confirm each item before you order to avoid delays and add-ons.
- Define your primary use case: practice, coaching/fitting, entertainment, or commercial play.
- Measure room width, height, and depth; verify swing clearance and target screen size.
- Choose your path: KIT-based staged build or turnkey Full Swing simulator quote.
- Lock core components: KIT, enclosure/screen size, projector throw/brightness, hitting surface, PC/iPad, and display.
- Select software: E6 CONNECT tier and/or GSPro; note renewal dates and device requirements.
- Plan install: mounts, cable runs, power, lighting, and wall/ceiling anchoring.
- Budget for extras: side netting, acoustics, protective padding, and decor.
- Account for shipping, taxes, and maintenance (screen/hitting strip replacements).
- Confirm support: warranties, installer or vendor support, and response times.
- Set a timeline: order lead times, installation window, and any room prep milestones.
If you can check each box without unanswered questions, you’re ready to purchase or request a turnkey quote.
FAQs
These quick answers cover the most common questions buyers ask as they compare KIT-based builds with turnkey simulators. For deeper dives, see the sections on space planning, ongoing costs, and KIT vs simulator above.
Is the Full Swing KIT a complete simulator by itself?
No. The KIT is a launch monitor with powerful data and app gameplay; on its own, it does not include an impact screen, enclosure, projector, or hitting turf. To create a simulator bay you can hit into, you’ll add those components plus a PC/iPad and a display.
Do I need a projector or can I start with a TV or iPad?
You can start with an iPad or a wall-mounted TV for practice and course play, then upgrade to a projector and impact screen later. When you’re ready, use a projector guide like BenQ’s to match throw ratio and brightness to your room and screen size for the best image.
What software works with Full Swing and how are subscriptions priced?
Full Swing KIT works with E6 CONNECT and GSPro in addition to FS Golf
KIT apps. E6 CONNECT’s Basic plan is listed at $299/year on the E6 pricing page, while GSPro licenses and pricing are published on the GSPro site—check there for current options and device requirements.
